C: Troubleshooting

From fsl3d wiki
Jump to: navigation, search

Hardware



Issue: Machine does not recognize closed cover.
Solution: Adjustment of the cover may be necessary. This may be accomplished with a set

Issue: Prints fail to adhere to the build plate.
Solution: The VAT leveling screws may need adjustment to ensure parallel contact between the build plate and the VAT. Contact FSL3D Technical Support for more information.

Software



Issue: Machine does not boot for more than one minute
Solution: Unplug power cable from machine (not at wall) for 5 seconds and plug back in.


Previous Section: B: Technical Specifications

Next Section: D: Material Safety Data