D: Material Safety Data
From fsl3d wiki
A copy of the Material Safety Data Sheets for all resins are located and may be downloaded at the FSL3D Download site.
- 1 Clear Photopolymer Resin
- 1.1 Product and Company Information
- 1.2 Composition / Information on Ingredients
- 1.3 Hazards Identification
- 1.4 First Aid Measures
- 1.5 Fire Fighting Measures
- 1.6 Accidental Release Measures
- 1.7 Handling and Storage
- 1.8 Exposure Controls / Personal Protection
- 1.9 Physical and Chemical Properties
- 1.10 Stability and Reactivity
- 1.11 Toxicological Information
- 1.12 Ecological Information
- 1.13 Disposal Considerations
- 1.14 Transport Information
- 1.15 Previous Section: C: Troubleshooting
- 1.16 Next Section: E: Warranty Statement and Warranty Information
Clear Photopolymer Resin
Product and Company Information
- Product Name: 3D Printing Resin
- Product Number: FSL3D Proprietary Resin
- Company: FSL3D, LLC
- Address: 6216 South Sandhill Road, Las Vegas, NV 89120
- Telephone: 702-802-3100
Composition / Information on Ingredients
- Proprietary Resin.
- Irritating to eyes, respiratory system and skin.
- Possible sensitizer.
Properties Affecting Health
- Harmful by inhalation.
- Harmful if swallowed.
- May cause eye / skin irritation.
- Suspect respiratory tract irritation.
Principle Routes of Exposure
- Inhalation: May cause respiratory tract irritation. May cause irritation to nose and throat. Headache. Nausea.
- Oral: Harmful if swallowed.
- Eye Contact: Skin contact causes eye damage.
- Skin Contact: May cause skin irritation. Repeated or prolonged dermal contact may cause sensitization by skin contact.
First Aid Measures
- Oral Exposure: If swallowed, wash out mouth with water provided person is conscious. Call a physician.
- Eye Contact: In the case of contact with eyes, rinse immediately with plenty of water for 15 minutes and seek medical attention.
- Ingestion: If ingested seek medical attention immediately.
- Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxygen and call a physician.
Fire Fighting Measures
- Flash Point: Unknown on product.
- Autoignition Temperature: Unknown on product.
- Flammability: Unknown on product.
- Fire Fighting Information: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Emits toxic fumes under fire conditions.
- Extinguishing Media: Water spray, foam, dry chemical or carbon dioxide.
Accidental Release Measures
- Personal Precautions: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.
- Environmental Precautions: Keep out of drains and waterways.
- Methods for Cleaning Up: Absorb with an inert material and then place in a chemical waste container and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.
Handling and Storage
- Handling: User Exposure: Do not breathe vapor. Avoid contact with eyes, skin or on clothing. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.
- Storage: The storage temperature should not exceed 100 °F (38 °C). Keep tightly closed. Store in a cool, dry, well ventilated place. Do not expose to ultraviolet light. High temperatures (>80 °C), pressure and contamination with peroxides may result in
autopolymerization of the product.
Exposure Controls / Personal Protection
- Engineering Controls: Ensure adequate ventilation. Safety shower and eye bath. Recommended use in a chemical fume hood.
- Eye Protection: Wear eye / face protection such as safety goggles or glasses with side shields.
- Hand Protection: Wear chemical-resistant gloves when handling.
- Skin and Body Protection: Wear impermeable gloves and suitable protective clothing. Prevent contamination of skin or clothing when removing protective equipment.
- Ventilation: Provide natural or mechanical ventilation to minimize exposure.
Physical and Chemical Properties
- Appearance: Clear.
- Physical State: Liquid.
Stability and Reactivity
- Chemical Stability: Stable under recommended storage conditions.
- Hazardous Polymerization: Reacts rapidly upon exposure to ultraviolet or blue light.
- Hazardous Decomposition Products: Acrid smoke-fumes, carbon monoxide, carbon dioxide, sulfur oxides, hydrocarbons, nitrogen oxides and perhaps other toxic vapors may be released during a fire involving this product.
- Route of Exposure: Inhalation: Material is harmful to mucous membranes and upper respiratory tract.
- Multiple Routes: Causes eye and skin irritation. Harmful by inhalation, ingestion or skin absorption.
- Sensitization: Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals.
- Signs and Symptoms of Exposure: Nausea, headache, and vomiting.
- Toxic to aquatic organisms.
- Dissolve or mix with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state, and local environmental regulations.
- Not regulated for transportation.