D: Material Safety Data

From fsl3d wiki
Revision as of 10:37, 5 May 2015 by Hongo (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A copy of the Material Safety Data Sheets for all resins are located and may be downloaded at the FSL3D Download site.

Clear Photopolymer Resin

Product and Company Information

  • Product Name: 3D Printing Resin
  • Product Number: FSL3D Proprietary Resin
  • Company: FSL3D, LLC
  • Address: 6216 South Sandhill Road, Las Vegas, NV 89120
  • Telephone: 702-802-3100

Composition / Information on Ingredients

  • Proprietary Resin.

Hazards Identification

Emergency Overview

  • Irritant.
  • Irritating to eyes, respiratory system and skin.
  • Possible sensitizer.

Properties Affecting Health

  • Harmful by inhalation.
  • Harmful if swallowed.
  • May cause eye / skin irritation.
  • Suspect respiratory tract irritation.

Principle Routes of Exposure

  • Inhalation: May cause respiratory tract irritation. May cause irritation to nose and throat. Headache. Nausea.
  • Oral: Harmful if swallowed.
  • Eye Contact: Skin contact causes eye damage.
  • Skin Contact: May cause skin irritation. Repeated or prolonged dermal contact may cause sensitization by skin contact.

First Aid Measures

  • Oral Exposure: If swallowed, wash out mouth with water provided person is conscious. Call a physician.
  • Eye Contact: In the case of contact with eyes, rinse immediately with plenty of water for 15 minutes and seek medical attention.
  • Ingestion: If ingested seek medical attention immediately.
  • Inhalation: If inhaled, remove to fresh air. If breathing is difficult, give oxygen and call a physician.

Fire Fighting Measures

  • Flash Point: Unknown on product.
  • Autoignition Temperature: Unknown on product.
  • Flammability: Unknown on product.
  • Fire Fighting Information: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Emits toxic fumes under fire conditions.
  • Extinguishing Media: Water spray, foam, dry chemical or carbon dioxide.

Accidental Release Measures

  • Personal Precautions: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.
  • Environmental Precautions: Keep out of drains and waterways.
  • Methods for Cleaning Up: Absorb with an inert material and then place in a chemical waste container and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.

Handling and Storage

  • Handling: User Exposure: Do not breathe vapor. Avoid contact with eyes, skin or on clothing. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.
  • Storage: The storage temperature should not exceed 100 °F (38 °C). Keep tightly closed. Store in a cool, dry, well ventilated place. Do not expose to ultraviolet light. High temperatures (>80 °C), pressure and contamination with peroxides may result in

autopolymerization of the product.

Exposure Controls / Personal Protection

  • Engineering Controls: Ensure adequate ventilation. Safety shower and eye bath. Recommended use in a chemical fume hood.
  • Eye Protection: Wear eye / face protection such as safety goggles or glasses with side shields.
  • Hand Protection: Wear chemical-resistant gloves when handling.
  • Skin and Body Protection: Wear impermeable gloves and suitable protective clothing. Prevent contamination of skin or clothing when removing protective equipment.
  • Ventilation: Provide natural or mechanical ventilation to minimize exposure.

Physical and Chemical Properties

  • Appearance: Clear.
  • Physical State: Liquid.

Stability and Reactivity

  • Chemical Stability: Stable under recommended storage conditions.
  • Hazardous Polymerization: Reacts rapidly upon exposure to ultraviolet or blue light.
  • Hazardous Decomposition Products: Acrid smoke-fumes, carbon monoxide, carbon dioxide, sulfur oxides, hydrocarbons, nitrogen oxides and perhaps other toxic vapors may be released during a fire involving this product.

Toxicological Information

  • Route of Exposure: Inhalation: Material is harmful to mucous membranes and upper respiratory tract.
  • Multiple Routes: Causes eye and skin irritation. Harmful by inhalation, ingestion or skin absorption.
  • Sensitization: Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals.
  • Signs and Symptoms of Exposure: Nausea, headache, and vomiting.

Ecological Information

  • Toxic to aquatic organisms.

Disposal Considerations

  • Dissolve or mix with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Observe all federal, state, and local environmental regulations.

Transport Information

  • Not regulated for transportation.

Previous Section: C: Troubleshooting

Next Section: E: Warranty Statement and Warranty Information